Redwood City Utility Trenching handles all the digging for water lines, sewer laterals, gas pipes, and electrical conduits. We work on residential and commercial properties all across Redwood City and San Mateo County. Over the last 7 years, our licensed crews have completed more than 1,260 utility projects. That includes everything from single-family backyard ADUs and garage conversions to work around local landmarks like Dignity Health Sequoia Hospital, Roy Cloud Elementary School, and Woodside Central.
We take care of the entire job from start to finish. Before any equipment touches your property, we pull the required Redwood City Engineering Division encroachment permits and contact USA North 811 to locate and mark all buried public lines.
Tell us about your project, and we will prepare a free, no-obligation estimate.
811 Underground Safety Note: Before any digging starts, we contact USA North 811 to have existing underground utilities marked. This step is required by California law. It also reduces the risk of damaging lines already in the ground.
Cal/OSHA-Certified Site Safety
We use strong steel braces and shields to lock trench walls in place so they never collapse.
Hassle-Free City Permitting
We handle all city permits, road permits, traffic plans, and inspections for you so you don't have to deal with city paperwork
Settlement-Proof Compaction
We pack the soil tightly every 6 to 8 inches so your driveway, lawn, or patio never sinks or sags later.
We give you a written, itemized estimate before any digging starts. You see what each part of the job costs, so the final invoice matches what you approved.
Trenching prices depend on the site. Below are typical per-foot ranges for residential and light commercial work. They are planning figures, not quotes.
Trench Type
| Typical Cost per Linear Foot |
|---|---|
Electrical conduit | $8 – $25 |
Water line | $8 – $30 |
Sewer lateral | $15 – $40 |
Gas line | $15 – $40 |
Joint trench (electric, telecom, gas) | Quoted per project |
Several factors move a project toward the low or high end of these ranges:
Each estimate lists labor, equipment, materials, backfill, surface restoration, and permit fees as separate line items. We also note any assumptions, such as soil type, so you know what could change the price.
We contact USA North 811 to mark existing utilities before every dig. This step is required by California law and helps prevent damage that would add cost.
If we find unexpected conditions on site, we stop and explain the issue. You approve any change in writing before we continue.
We use a clear payment structure, so you know what to expect before work begins. All terms are listed in your written estimate and contract. Most residential and commercial trenching projects follow a milestone-based schedule tied directly to completed stages of work:
A broken sewer lateral, a leaking water service, or a damaged gas line needs quick excavation, the right utility contacts, and a stable temporary fix before permanent repairs begin. We handle emergency trenching for these problems across Redwood City, from Redwood Shores to Emerald Hills.
Broken Sewer and Water Line Response
When we arrive, we first locate the break with a camera inspection for sewer lines or acoustic leak detection for pressurized water lines.
We then excavate only the section needed to reach the damage. If a break is on the city side of the property line, we help you contact Redwood City Public Works so the correct party handles the repair.
Call 911 and PG&E at 1-800-743-5000 if you smell gas or hear hissing near a trench. PG&E controls the gas supply and is responsible for shutting off and making safe any leak on its system.
We coordinate with PG&E crews and request emergency 811 markings before any digging resumes. We do not excavate near a damaged gas line until the utility confirms it is safe to proceed.
During the visit, we identify the cause, mark existing utilities, and explain the repair options. We schedule the permanent repair and handle the required Redwood City or San Mateo County permits, depending on where your property is located.
Most temporary fixes are clamping or capping leaking water lines, trench shoring or plating, and fencing and barricading.
We dig, lay, and backfill trenches for sewer, water, electrical, and gas lines at single-family homes, ADUs, and small multi-unit properties in Redwood City. Each project includes utility locating through USA North 811, trenching to code-required depths, coordination with inspections, and restoration of the work area.

Under Redwood City Municipal Code and Public Works guidelines, the property owner is responsible for repairing and replacing the entire sewer lateral (from the house all the way to the main line in the street). The city only provides snaking/clearing assistance on the lower portion if a proper property line cleanout is already installed.
We handle complete sewer lateral trenching, repair, and replacement:
We grade every trench to a minimum 1/4-inch-per-foot slope, bed the pipe in clean crushed rock or sand, and schedule mandatory inspections with the Redwood City Engineering Division before backfilling. If an inspection shows a blockage on the public sewer main itself, we will help you notify Redwood City Public Works immediately.

PG&E supplies natural gas in Redwood City and owns the line up to the meter. Piping downstream of the meter belongs to the homeowner, and that is the portion we trench for.
Typical residential gas projects include:
Buried gas piping is commonly polyethylene (PE) with a tracer wire, which allows the line to be located later. Gas work requires a permit and a pressure test before the trench is closed. We coordinate trenching with your licensed plumber or gas fitter and schedule backfill only after the inspector signs off.

We deliver clean, code-compliant trenching and line installation to protect your home’s main water supply for decades.
Our Water Line Trenching Services:
Noticing low water pressure or damp spots on your lawn? Contact us today for a free on-site trenching quote and keep your water running clean.

We dig the trench, lay the conduit, place warning tape above it, and coordinate with your electrician for wire pulling and inspection. For new or upgraded service from PG&E, we can trench to PG&E specifications so the utility can complete its portion of the work.
Wiring Method | Typical Minimum Cover
|
|---|---|
Rigid metal conduit | 12MP Dual Camera |
PVC conduit (non-encased) | 18 inches |
Direct-burial cable | 24 inches |
120V GFCI residential branch circuit, 20A max | 12 inches |
We install and repair the underground infrastructure commercial properties rely on, including water mains, sewer lines, storm drains, telecom conduit, and gas feeds. Every project complies with the California Plumbing Code, National Electrical Code (NEC), local permitting rules across Redwood City and San Mateo County.
Sewer Main Services

Commercial sewer lines rely on strict gravity flow, making precise slope calibration essential. Our crews use laser-guided grading tools to ensure a consistent, code-compliant fall from the building drain to the municipal connection.
Service | Typical Application |
|---|---|
New sewer laterals | Restaurants, offices, retail centers |
Main line extensions | Multi-building sites and subdivisions |
Manhole installation | Junctions and changes in direction |
Line replacement | Cracked, root-damaged, or sagging pipe |
We coordinate inspections with the local sanitary district before backfill. Grease interceptor connections for food service businesses are also part of our services. Contact us if you need immediate assistance.

Commercial roofs and parking lots generate high-volume surface runoff. Without proper underground drainage, standing water degrades asphalt, weakens foundations, and risks flooding.
We excavate and install complete commercial stormwater systems:
If your San Mateo County project must meet Provision C.3 stormwater rules under the regional Municipal Regional Permit (MRP), we have you covered. We establish site sediment controls on day one to keep silt out of city storm drains.

We provide specialized trenching and channel preparation for commercial natural gas service:
Before digging, we log a clearance ticket with USA North 811 to map existing utilities. Our crews maintain mandatory utility separation distances, use approved sand bedding, and lay high-visibility warning tape.

Modern commercial sites require high-speed data pathways. We dig and lay concrete-encased or direct-burial conduit runs for fiber optic backbones, copper lines, and low-voltage systems:
Our work typically includes:
If you are setting up a new commercial build or upgrading your property's tech grid, reach out today or request a free quote online to get your project moving.
Some projects in Redwood City need more than an open trench, such as boring under a driveway, exposing buried lines without damage, or routing several utilities in one excavation. We handle trenchless boring, hydro excavation, joint trenching, concrete-encased duct banks, and underground fire service lines for residential, commercial, and public-works clients.

Trenchless digging lets us install or replace underground pipes without tearing up your lawn, driveway, or sidewalk. It is the best choice if you want to avoid the high cost of rebuilding custom hardscapes or replanting your yard after the job is done.
Here are the main ways we do it:
That keeps surface damage low, cuts down on cleanup costs, and prevents noise and traffic headaches for your neighbors.

Hydro excavation uses high-pressure water to loosen the soil, and then a vacuum truck sucks it all up. It’s a gentle way to dig around gas, electric, fiber, and water lines that are already in the ground, so nothing gets damaged along the way.
Most of the time, it’s our go-to for potholing, which is just digging small test holes to see exactly where a buried line sits and how deep it goes. USA North 811 marks will tell you roughly where a line runs, but they won’t tell you how far down it is.
Potholing helps you:
Hydro excavation is also handy in tight spaces and around tree roots, where bringing in a digger just isn’t an option.

A duct bank is a group of conduits, usually PVC, held in place with spacers and encased in concrete. It protects electrical and communication cables from damage and allows cables to be replaced later without new excavation.
Duct banks are common at:
Our installation process covers excavation, conduit placement at the specified spacing, concrete encasement, and backfill. We can also set pull boxes, vaults, and handholes that connect duct bank runs.
Our CSLB license number is on every estimate, so you can check it yourself in seconds. Every job is backed by a contractor’s bond, liability insurance, and workers’ comp, which means you’re never on the hook if something goes wrong. Need a certificate of insurance for your HOA or property manager? It comes with your contract.
From the soft bay mud in Redwood Shores to the rocky hills of Emerald Hills and Farm Hill, our crew knows what’s under your property before the first shovel hits dirt. That local know-how means fewer surprises, fewer delays, and a trench that holds up for years. We handle all the city permits too, so you don’t have to.
Hitting a gas or power line is dangerous and expensive, so we take no chances. We call 811, double-check every marked line, hand-dig near utilities, and use private locators for lines the utility companies don’t mark. Every trench meets Cal/OSHA rules and gets checked daily.
No vague lump sums here. Your written estimate breaks down digging, materials, permits and cleanup line by line, so you know exactly what you’re paying for before we start.
You’ll get clear dates for every stage of the job. If we hit something unexpected, like an unmarked line or buried concrete, we stop and talk it through with you first. Nothing extra happens without your written OK.
Every project comes with a written workmanship warranty covering trench settling, the joints we install, and the surfaces we restore. If an issue ever pops up, one call to our office gets someone out to fix it, no runaround.
We meet you at your property in Redwood City or nearby San Mateo County and walk the planned trench route together. While we’re there, we measure the run and check a few key things:
After the visit, we send a free written estimate covering the scope, trench length and depth, materials, cleanup and timeline.
Most trenching jobs in Redwood City need a permit. Work on private property usually needs a building or plumbing permit, while digging in a sidewalk or street needs an encroachment permit from the city. Our team at Redwood City Utility Trench takes care of the paperwork and works with PG&E when a service connection is part of the job.
We also call USA North 811 at least two working days before digging, as California law requires, so utility companies can mark their lines. Since 811 doesn’t mark private lines like sprinkler pipes or garage feeds, we may bring in a private locator too.
We pick equipment that fits the job, from small walk-behind trenchers to compact excavators. Within 24 inches of a marked line, we switch to hand digging or vacuum excavation to keep existing utilities safe.
Here are the usual minimum depths we work to:
Any trench 5 feet or deeper gets shored or sloped to meet Cal/OSHA rules. We then lay bedding material, set the pipe or conduit, and add tracer wire and warning tape where needed.
Before we fill anything back in, an inspector checks the open trench. This could be a city inspector, someone from PG&E or both, and they look at things like:
Once it passes, our crew backfills in 6 to 12-inch layers and packs each one down tight. Under driveways and paved areas, we compact to the level the permit calls for, usually 90 to 95%, so the ground won’t sink later.
We put your yard or paving back the way it was. That might mean new sod, fresh seed, relaid pavers or fixed sprinkler lines. For concrete and asphalt, we cut clean edges and pour or patch, and any sidewalk or street repairs follow city standards.
Last, we walk the site with you to:
We haul away all leftover dirt and equipment before calling the job done.
The right pipe or conduit depends on the utility, the soil, the depth, and the local code. We match each material to your project's requirements and the City of Redwood City's engineering standards.
Utility | Common Materials | Typical Use |
|---|---|---|
Water Service | PVC C900, HDPE, Type K copper | Service lines, fire lines, irrigation mains |
Sewer Laterals | SDR 35 PVC, Schedule 40 PVC, ABS, HDPE | Gravity sewer lines, cleanouts, and storm drains. HDPE is used for directional drilling/bursting. |
Gas Line | Medium-Density Polyethylene (MDPE—Yellow) | Private lines from meter to outbuildings, BBQs, pools. Installed with 18-gauge tracer wire. |
Electric Power | Schedule 40 PVC, Schedule 80 PVC, Rigid Metal Conduit (RMC) | Service panel feeds, EV chargers, ADU sub-panels. Schedule 80 is used in exposed/high-impact areas. |
Telecom & Data | Schedule 40 PVC Conduit, HDPE Innerduct | Fiber optic, copper telecom lines, and low-voltage runs. Fitted with pull strings for future pulls. |
Schedule 80 PVC features extra-thick walls for areas vulnerable to surface damage or vehicle traffic. HDPE pipe is heat-fused into continuous runs, making it ideal for trenchless installations under driveways and landscaping. For gas and power runs, we trench to exact PG&E Greenbook specifications for depth, bedding, and utility separation distances.
Trenching for water, sewer, gas, or electrical lines in Redwood City requires a city permit, an active USA North 811 ticket, and scheduled inspections before backfill. We handle each of these steps so your project meets local codes and California excavation law.
Our team files everything through eTRAKiT, the city’s online permit portal, including:
California law requires a call to USA North 811 before any digging. Here’s what that involves:
PG&E oversees gas and electric work, while the City of Redwood City handles water and sewer connections. We schedule every required inspection with the city, and you can track its status on eTRAKiT anytime.
Our crew stays on site during each inspection to answer questions and fix anything the inspector flags. No trench gets filled in until it passes.
Each project uses pipe and conduit rated for the specific utility, excavation equipment matched to the site's access and the density of existing lines, and bedding and backfill that meet City of Redwood City engineering standards. The goal is a trench that passes inspection and protects the line for its full service life.
We select pipe based on the utility type, the required pressure rating, and local code. The table below shows the materials we install most often.
Utility | Common Materials | Notes |
|---|---|---|
Water service
| Type K copper, PVC C900, HDPE | C900 is used for larger mains and fire lines. |
Sewer laterals | SDR 35 PVC, ABS, HDPE | HDPE is common for pipe bursting replacements. |
Gas | Yellow PE (polyethylene) | Installed with tracer wire for locating |
Electrical | Schedule 40 and Schedule 80 PVC conduit | Schedule 80 is used where conduit is exposed to physical damage. |
Low-voltage/data | PVC conduit, HDPE innerduct | Pull strings are left in for future cable runs. |
Trenching & Hydro Excavation Equipment
Our equipment depends on the trench width, the depth, and how close the work is to existing utilities.
We call 811 (USA North) before every dig, so existing utilities are marked.
Proper pipe support starts with a layer of clean sand or small pea gravel underneath the pipe. This keeps the pipe level and protects it from sharp rocks.
Above the pipe, we fill the trench with crushed rock base or a quick-setting concrete mixture, especially under driveways and streets where heavy traffic passes overhead. We pack the soil in thin layers with power tampers to prevent later settlement and meet Redwood City's building rules.
We encourage you to read what past clients say before you hire us. Reviews give you a direct look at how we handle scheduling, communication, and cleanup on real job sites in Redwood City and San Mateo County.

Julian Rojas
Homeowner, Redwood City (Woodside Plaza)
Our main sewer line backed up right before a holiday weekend, and two other plumbing companies told us we had to tear up 40 feet of our custom stone driveway to fix it. I called these guys for a second opinion, and they brought out their directional drilling setup instead. They ran a brand-new HDPE line underground from two small entry pits on the edge of the lawn.

Garrett Halloway
Project Director, Apex Commercial Builders
We were on a tight 90-day window to get underground utilities and a retention chamber installed for a new commercial build off El Camino Real. Their crew laid out all the C900 water mains, tied into the city connection, and got the C.3 stormwater treatment units installed strictly to our civil engineer's blueprinted specs. City of Redwood City inspectors signed off on the backfill compaction tests on the very first pass.

Nadia M.
Facilities Manager, Menlo Park Business Park
Their team came in over the weekend, mapped out the existing buried power lines, and dug out a clean pathway for four Schedule 80 PVC conduits. They set the pull boxes, put in tracer wire, and packed the aggregate base backfill so solid that our paving team got to work first thing Monday morning. Zero downtime for our tenants.

Brandon Kosta
Site Superintendent, San Bruno
During site prep for our multi-family residential project in San Bruno, we hit groundwater earlier than expected while digging for the main storm drain lateral. Their operator did not bat an eye. They brought in dewatering pumps, prepped a solid 3/8-inch pea gravel bedding layer, and got the catch basins connected to the municipal system before the next storm system hit.
Ground conditions vary across the area. Properties near Redwood Shores and the bayfront often have soft or wet soils, while lots in the hills can involve rock, slopes, and mature tree roots.
We also serve communities near Redwood City:
Not sure if your property is in our service area? Contact us with your address, and we will let you know if we can take on your project.
Stop guessing what your underground work will cost. We give you a clear, fixed-price bid upfront. No hidden fees, no surprise charges, and no sales pressure.
Your final price depends on depth, soil type, and whether we patch asphalt or concrete when finished. We explain every line item so you know exactly what you pay for before we break ground.
Ready to start? Call us now to lock in your free quote.
Yes, utility line installation requires building permits from the City of Redwood City, as well as encroachment permits for work in public streets or sidewalks.
USA North 811 marks public utilities up to the meter, while private locators map private lateral lines and secondary runs past the property meter.
Simple residential conduit trenches take 1 to 2 days, while deeper sewer lateral replacements or commercial utility projects require 2 to 4 days plus inspection time.
Burial depths range from 18 to 24 inches for gas and electrical lines, 24 to 30 inches for water mains, and 24 to 48+ inches for gravity sewer laterals.
Projects include mechanical soil compaction, gravel backfill, asphalt patching, concrete slab restoration, or surface preparation for landscaping.
Yes, micro-excavators, compact trenching units, vacuum excavation, and targeted hand digging allow work in tight side yards and narrow alleyways.
Open-cut trenching excavates a continuous open surface path for direct installation, whereas trenchless methods use entry and exit pits to drill beneath existing pavement.
Work near foundations requires engineered shoring within the structural load zone, while digging near protected trees requires root pruning oversight or directional drilling.
Pre-excavation pipe locating minimizes risk, but if an unmapped pipe is exposed, digging halts immediately to secure the line and perform structural repairs.
Pricing depends on depth, linear footage, soil stability, surface removal requirements, equipment access, and public right-of-way permitting.
Contact our team with your property address, target utility, estimated footage, and site photos to schedule an on-site survey and written quote.